Error code · Wall Oven

DCS WOSV230 Wall Oven Codes F1-10 to F1-21: Group of Technical Alerts

High · stop use, call now

Code: F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21
Appliance: Wall Oven
Brand: DCS
Warranty: 30-day workmanship

What F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21 means

This page covers the F1 codes from ten up to twenty-one, except sixteen, on the DCS WOSV230 and WODV230. All of them are three-part technical alerts, and the owner's manual explains none of the numbers separately. They trace back to the electronics for the clock and the power supply, so the display tells you an alert exists but not which circuit it came from. The oven may stop heating and hold the code on the display until it is checked.

Common causes of F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21

A clock board or its connections
A power board or its supply
A sensor or control circuit that reports to those boards

✓ One safe check you can try

1. Write down the exact code, since we handle each number differently. 2. Wait for the fans to stop and the oven to cool. 3. Once the oven is cool and quiet, switch it off at the breaker. 4. Leave the oven off. 5. Give us the code and your model number when you book.

! Why to stop there

Because many numbers share one general description, your exact code decides which circuit we test first.
We do not replace boards on a guess, and a part is confirmed as available before any repair begins.
You see a written price first, and we are straightforward if repairing is not worth it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F1-01 / F1-02DCS WOSV230 Wall Oven Codes F1-01 and F1-02: Electronics Alert OFF in both displays, flashing colon (power-cut set-up mode)DCS WOSV30 Wall Oven OFF in Both Displays: Set-Up Mode After a Power Cut F1-03DCS WOSV230 Wall Oven Code F1-03: Oven Stopped With a Technical Alert F1-04 / F1-05DCS WOSV230 Wall Oven Codes F1-04 and F1-05: Alert on the Display F1-06DCS WOSV230 Wall Oven Code F1-06: Board Alert That Needs a Test F1-16DCS WOSV230 Wall Oven Code F1-16: Alert From the Clock and Power Side F2-01 / F3-01DCS WOSV230 Wall Oven Codes F2-01 and F3-01: Paired Technical Alerts F2-02 / F3-02DCS WOSV230 Wall Oven Codes F2-02 and F3-02: Board Alert Pair

F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21 questions

Why are so many F1 codes on one page?

The owner's manual treats them all as technical alerts and does not explain the individual numbers. Your exact code tells us where to start testing the electronics.

Does a higher number mean a bigger problem?

Not necessarily. The numbers are not ranked by severity in the owner's manual, so we do not read a bigger number as a bigger problem.

What do I do first?

Write the code down, let the fans stop and the oven cool, then switch off at the breaker. After that, give us a call to arrange the visit.

Book a visit

Still seeing F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 489-3741