Error code · Wall Oven

DCS WOSV230 Wall Oven Codes F2-01 and F3-01: Paired Technical Alerts

F2-01 and F3-01 are a matched pair of three-part F codes on DCS WOSV230 and WODV230 wall ovens, with the same last digits and a different first number. The owner's manual describes any F code with…

High · stop use, call now

(713) 489-3741

Code: F2-01 / F3-01
Appliance: Wall Oven
Brand: DCS
Warranty: 30-day workmanship

What F2-01 / F3-01 means

F2-01 and F3-01 are a matched pair of three-part F codes on DCS WOSV230 and WODV230 wall ovens, with the same last digits and a different first number. The owner's manual describes any F code with a number as a technical alert and does not give individual meanings, so we find the cause by testing the oven's clock and power electronics. The display holds the code, and the oven may not run normally.

Common causes of F2-01 / F3-01

A clock or power board
A connection between the control and the oven
A supply problem to the oven's electronics

✓ One safe check you can try

1. Write down which prefix you see, F2 or F3, and the last two digits. 2. Allow the fans to run until they stop on their own. 3. After the oven has cooled, turn off its breaker. 4. Do not operate the oven again until we have examined it. 5. Contact us with the model number.

! Why to stop there

Seeing F2 versus F3 tells us which side of the electronics to examine first, so tell us exactly what you saw.
We confirm a replacement board is available before we repair one of these ovens.
You get a written price first, and we say plainly if it is not worth repairing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F2-17 / F3-17DCS WOSV230 Wall Oven Codes F2-17 and F3-17: Code Stays on the Display F + number (single code)DCS WOSV30 Series Wall Oven F + Number Code: Oven Beeps and Stops F2-20 / F2-22 / F3-20 / F3-22DCS WOSV230 Wall Oven Codes F2-20, F2-22, F3-20 and F3-22: Alert Group F1-01 / F1-02DCS WOSV230 Wall Oven Codes F1-01 and F1-02: Electronics Alert OFF in both displays, flashing colon (power-cut set-up mode)DCS WOSV30 Wall Oven OFF in Both Displays: Set-Up Mode After a Power Cut F1-03DCS WOSV230 Wall Oven Code F1-03: Oven Stopped With a Technical Alert F1-04 / F1-05DCS WOSV230 Wall Oven Codes F1-04 and F1-05: Alert on the Display F1-06DCS WOSV230 Wall Oven Code F1-06: Board Alert That Needs a Test

F2-01 / F3-01F2-01 / F3-01 questions

What is the difference between F2-01 and F3-01?

The manual does not explain them separately. They share the same ending and are tied to the oven's electronics, so we test both sides of the circuit.

Can I clear the code myself?

Not reliably. Let the fans stop and the oven cool, then switch off at the breaker. The code may return if the underlying problem is still there.

How do I schedule a visit?

Call us or use the online form, and we will confirm a three-hour arrival window. Have the code and the model number ready.

Book a visit

Still seeing F2-01 / F3-01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 489-3741