Most common issues on this model
- Chimney cover rattle
- Fan not starting on any speed
- Grease filter clogging
- Control switch contacts
The ES30 is a discontinued 30-inch euro-style chimney hood from DCS, with a fan control that steps through LO, MED, HI and MAX. It hangs on the wall over a 30-inch range, and a fair number are still running in Houston kitchens.
On a chimney hood the visible parts are the first things to give trouble. A cover that rattles has usually worked loose from its brackets, and tightening it ends the noise. A fan that will not start sends us to the control, then the capacitor or motor behind it. Filters that have not been cleaned in a long time cut the airflow and let grease reach the blower.
With the ES30 discontinued, we first see which parts can still be had. You get a written price before work begins, and anything we order is matched to the model and serial on the label.
Key features
- 30-inch euro-style chimney vent hood
- Fan control with LO, MED, HI and MAX
- Discontinued DCS model
- Shares guides with the professional hoods
My hood fan will not start on any speed. What is wrong?
Usually the control, the wiring or the motor start part. We test power at the control first, then the motor, so we replace only the part that failed.
The chimney cover rattles when the fan runs. Can you stop it?
Yes. Rattling usually means loose brackets or a cover that has shifted. We secure it and check the blower for a loose wheel that adds to the noise.
How do the four fan speeds work?
LO, MED, HI and MAX step the blower up through the control. If one speed is missing or the fan stays on one speed, the switch or control is the likely cause.
Book repair for your ES30
Book online in about a minute, or give us a call. Same-day appointments are available inside the Loop on most days, and next-day service across the rest of Houston.