Booking today · Houston · three-hour arrival windows Independent DCS specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 489-3741 Book Service
Error code · Wall Oven

DCS WOSV30 Wall Oven OFF in Both Displays: Set-Up Mode After a Power Cut

On DCS WOSU30, WOSV30, WODU30 and WODV30 wall ovens, this is the older 30-inch series, and it is still in many Houston homes. After a power cut the oven goes into Set Up mode. The oven…

Low risk · DIY check OK
Book Service(713) 489-3741
Code
OFF in both displays, flashing colon (power-cut set-up mode)
Appliance
Wall Oven
Brand
DCS
Warranty
30-day workmanship

What OFF in both displays, flashing colon (power-cut set-up mode) means

On DCS WOSU30, WOSV30, WODU30 and WODV30 wall ovens, this is the older 30-inch series, and it is still in many Houston homes. After a power cut the oven goes into Set Up mode. The oven mode and temperature displays both show OFF, they look dim or unresponsive, and the colon in the clock flashes. It is a customer-visible message, not a failed part. The oven is simply waiting for you to set the clock.

Common causes of OFF in both displays, flashing colon (power-cut set-up mode)

  • A power cut or breaker trip that reset the oven
  • A clock that has not been set since power returned
  • Nothing wrong with the oven itself
✓ One safe check you can try

1. Check that power is back and the breaker is on. 2. Look at the clock colon. If it is flashing, the oven is in Set Up mode. 3. Follow the Setting the Clock steps in the owner's manual. 4. Enter the time of day. 5. Test the oven once the clock is set and the displays respond.

! Why to stop there
  • Setting the clock normally brings the oven back, so we only visit if the displays stay dark or OFF after you do.
  • If the oven keeps dropping into Set Up with no power cut, we test the supply and the control.
  • The WOS line is older, and we repair it, though some parts are scarce, so we confirm what is available before the work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

F1-01 / F1-02DCS WOSV230 Wall Oven Codes F1-01 and F1-02: Electronics Alert F2-20 / F2-22 / F3-20 / F3-22DCS WOSV230 Wall Oven Codes F2-20, F2-22, F3-20 and F3-22: Alert Group F1-03DCS WOSV230 Wall Oven Code F1-03: Oven Stopped With a Technical Alert F1-04 / F1-05DCS WOSV230 Wall Oven Codes F1-04 and F1-05: Alert on the Display F1-06DCS WOSV230 Wall Oven Code F1-06: Board Alert That Needs a Test F1-10 / F1-11 / F1-12 / F1-13 / F1-14 / F1-15 / F1-17 / F1-18 / F1-19 / F1-20 / F1-21DCS WOSV230 Wall Oven Codes F1-10 to F1-21: Group of Technical Alerts F1-16DCS WOSV230 Wall Oven Code F1-16: Alert From the Clock and Power Side F2-01 / F3-01DCS WOSV230 Wall Oven Codes F2-01 and F3-01: Paired Technical Alerts
OFF in both displays, flashing colon (power-cut set-up mode)OFF in both displays, flashing colon (power-cut set-up mode) questions
Why do both displays on my DCS oven show OFF?

After a power cut the oven enters Set Up mode. Both displays show OFF and the clock colon flashes until you set the clock.

How do I fix it?

Set the clock by following the Setting the Clock section of the owner's manual. After that, the oven should respond to the knobs again.

What if setting the clock does not help?

Then something else is wrong. Tell us what the displays do and whether the colon still flashes, and we will check the oven.

Book a visit

Still unsure about OFF in both displays, flashing colon (power-cut set-up mode)?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 489-3741
☎ Call our office ▤ Book Service